365 Mep Coordinator jobs in Indonesia

Job Description
We are looking for an experienced construction management professional to join our existing irrigation project. The successful candidate will lead a team of supervisors, inspectors and surveyors, as well as coordinating with other teams (quality control, design, health and safety) in the construction supervision of a new civil works contract (FIDIC Red book). This is a senior position within a large and established project team. The role will report to the project Team Leader and work with multidisciplinary experts based in Indonesia and globally.

Specific Tasks Would Include

• Execute delegated authorities of the Engineer under a FIDIC red book civil works contract (in accordance with a project Construction Supervision Plan) for the rehabilitation and extension of an irrigation scheme in South Sumatra.
• To carry out overall management and coordination of a supervision team, in coordination with the Team Leader.
• To review, or coordinate the review of, the existing reports, design documents and design drawings for overall irrigation facilities to be newly constructed or improved; 4. To oversee the checking of control points and benchmarks used for previous surveying and, if needed to evaluate the accuracy of existing topographic maps for design adjustment.
• Manage and coordinate the review and revision of design documents, calculation and drawings and propose to adjust the design when necessary.
• To execute the construction supervision of civil works including the following items:
• Implement agreed procedures for method of supervision, document/letter form, procedure for approval, drawing submission and approval flow, and so on.
• Attend regular meeting, to check and confirm the work method, work performance, work progress, status of equipment and materials, work schedule and safety control as well as problems to be solved.
• Check the work plan, construction method, construction time schedule, construction equipment schedule, manning schedule and safety control plan proposed by the contractor.
• Check the quality control method for both construction site and laboratory (equipment and method) proposed by the contractor.
• Check and finalize the controlled point and benchmarks for construction set by the contractor.
• Check the setting out lines and levels prepared by the contractor.
• Coordinate and manage the check of construction drawings, construction/ shop drawings, design, documents, and calculations prepared and submitted by the contractor.
• Coordinate and manage the check of construction materials proposed by the contractor including proposed borrow areas.
• Supervise the laboratory testing and data preparation carried out by the contractor.
• Inspect the quarry sites, borrow areas, stockpile areas and factory supplying and/ or fabricating the materials for construction.
• Coordinate the supervision of field tests and factory tests and to determine the appropriate equipment and methods for quality control with project staff of government.
• Inspect the construction method, equipment use, work performance and quality of site works comparing with the technical specification throughout the construction period with project staff of government.
• Coordinate the survey and measurement of the work output performed by the contractor from a viewpoint of quality and progress.
• Check Contractor's Interim Payment Applications
• Inspect the safety control method and facilities applied by the contractor.
• Review and assess contractor's claim in coordination with the Employer/ the Engineer.
• Coordinate the check of as-built drawings prepared by the contractor.
• Ensure proper records are kept as necessary for preparation of a completion report.
• Conduct final inspection of all completed works executed by the contractor with project staff of government and recommend issuing the completion certificate; and
• Contribute to regular progress reporting to, and meetings with, the Client with respect to construction progress, quality, budget and issues.
• Lead by example in exceptional management of health and safety risks and drive continuous improvement from project and contractor staff.

Candidate Specification

• Experience working internationally, outside Indonesia.
• Education: University graduate in irrigation or civil engineering
• Significant years working experience in planning, design, and construction supervision of irrigation, dam, or other water resources development projects.
• Experience in the supervision of FIDIC red or pink book contracts.

It would be preferable if the candidate also has the following specifications:

• Indonesian Project: At least 1 year experience as a professional engineer on an irrigation project in Indonesia.
• Indonesian Language: Technical meeting level.
• Experience working on projects funded by multilateral or bilateral donors.

Equality, diversity and inclusion
We put equality, diversity and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they have the opportunity to contribute.

Agile working
At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team and personal commitments. We embrace agility, flexibility and trust.

Location(s):

Kab OKU Timur, ID

Contract Type:
Contract

Work Pattern:
Full Time

Market: Water

Discipline:
Water

Job Ref:
9741

Recruiter Contact:
Shailesh Chougule

PThis role is part of GMC's Construction Management Consulting Division. Unlike contractor-based QA/QC, this function focuses on documentation accuracy, preventive error checking, and international client coordination. Projects run on a daily and weekly deliverable basis (POs, drawings, take outs), requiring precision and consistency.

Key Responsibilities,

• Review and validate technical documents (set-outs, BOQ, plumbing/MEP drawings) prepared by the estimator team.
• Develop and maintain QA/QC checklists aligned with international client standards.
• Act as a gatekeeper to ensure zero-error documents before delivery to clients.
• Coordinate with estimators, project coordinators, and overseas clients on corrections and clarifications.
• Prepare structured QA/QC reports (daily/weekly).
• Identify recurring issues and propose corrective & preventive actions.

Requirements,

• Bachelor's Degree in Civil.
• Minimum 5 years of proven experience in QA/QC within construction management or consulting firms (not only contractor site supervision).
• Strong knowledge in MEP documentation review.
• Excellent English reading and writing skills (mandatory), able to review technical documents and communicate clearly via email with international clients.
• Proficiency in tools such as Planswift, PDF Editor, MS Office (advantage).
• Detail oriented, disciplined, and experienced in working with tight deadlines.
• Based in Surabaya, available to work full-time on site and ready join ASAP.

Job Type: Full-time

Kualifikasi :

• Minimal SMA / D3 jurusan Teknik ( Elektro )
• Usia Maks. 38 thn
• Memiliki minimal 3 (tiga) tahun pegalaman sebagai mekanik mesin automasi
• Mengerti tentang arus listrik, medium, panel
• Terbiasa menggunakan PLC (Mahir) tipe Omron dan Siemens.
• Mampu membaca gambar listrik , wiring dan trouble shooting listrik
• bisa menggunakan komputer
• Jujur dan Bertanggung Jawab
• Mampu berkomunikasi dengan baik dan dapat bekerja di bawah tekanan.

Electrical System Design & Development
Design and develop electrical systems and controls for various pump types (centrifugal, submersible, positive displacement).

Cross-Functional Collaboration
Collaborate with mechanical engineers, technicians, and project managers to integrate electrical components into pump systems.

Testing & Commissioning
Conduct testing/commissioning of electrical systems, including functional tests and troubleshooting.

Technical Support & Client Guidance
Provide support during installation, operation, and maintenance of pump systems.

Internal Coordination
Coordinate with Operations, Production, and Quality to resolve project issues.

Procurement & Specification Management
Liaise with Purchasing and Production for product specifications.

Sales Support & Technical Clarification
Support the sales team with technical clarifications.

Documentation & Change Management
Prepare BOMs and implement Engineering Change Notifications (ECN).

Requirements :

• Minimal SMK (Bidang Teknik)
• Pengalaman minimal 2-3 tahun di bidang Teknik Elektronik Mekatronika.
• Menguasai software desain kelistrikan (AutoCAD Electrical, ETAP, dll)
• Pemahaman yang baik tentang kode dan standar kelistrikan (IEC, IEEE, SNI)
• Mengerti dan Paham PLC (Omron, Mitsubishi, Siemens)
• Kemampuan analitis dan problem solving yang baik
• Kemampuan komunikasi yang baik.
• Mampu bekerja mandiri maupun dalam tim
• Siap bekerja di hari libur dan bekerja di atas jam normal
• Bersedia melakukan perjalanan dinas keluar kota dalam jangka waktu tertentu
• Memiliki Kendaraan Bermotor.

Job Descriptions :

• Merancang dan mengembangkan sistem kelistrikan termasuk distribusi listrik, sistem kontrol, dan instrumentasi
• Membuat skema kelistrikan, diagram wiring, dan spesifikasi teknis
• Instalasi Sistem kamera dan Rejector di site/Line Customer
• Program sistem kamera secara keseluruhan
• Melakukan wiring panel control
• Melakukan testing, commissioning, dan troubleshooting sistem kelistrikan
• Berkolaborasi dengan tim multidisiplin dalam proyek engineering
• Memastikan kepatuhan terhadap kode listrik dan standar keselamatan
• Menyiapkan dokumentasi teknis dan laporan

Kualifikasi :

• Usia 23 s/d 36 tahun
• Minimal lulusan SMK/D3 jurusan Elektrik / Mekatronik
• Minimal pengalaman 4 tahun di industri manufacturing
• Menguasai Electric Diagram
• Menguasai instalasi electric
• Mengerti sistem pneumatic, instrument, dan alat ukur
• Di utamakan mengerti sistem PLC/SCADA

Job Description :

• Melakukan pekerjaan preventive & corrective maintenance terhadap mesin produksi
• Melakukan perbaikan troble shooting
• Melakukan perbaikna dan instalasi untuk listrik, penerangan, instrument dan alat ukur
• Melakukan kalibrasi internal terhadap alat ukur
• Bekerja shifting

Kualifikasi

• Pendidikan diploma atau gelar di bidang Teknik Elektro
• Minimal 1 tahun pengalaman konsultan MEP
• Mahir dalam penggunaan perangkat lunak CAD, seperti AutoCAD
• Memahami standar dan SNI, PUIL listrik
• Pengetahuan tentang perangkat listrik dan teknis lainnya

Tanggung Jawab

• Membuat gambar, Menghitung skema teknis untuk proyek-proyek Listrik
• Membantu dalam perencanaan, desain, dan pengembangan solusi listrik
• Berkoordinasi dengan tim teknis lainnya untuk memastikan kesesuaian desain
• Memastikan kepatuhan terhadap standar dan peraturan yang berlaku
• Memberikan dukungan teknis dan pemecahan masalah selama tahap konstruksi sistem kelistrikan
• Mampu mengidentifikasi dan memperbaiki jaringan listrik bermasalah
• Mampu merakit jaringan listrik, panel ats, dan genset

1. Menguasai pengetahuan tentang kelistrikan.
2. Berpengalaman minimal 1 tahun dibidangnya.
3. Pengalaman di pabrik pakan menjadi nilai plus.
4. Mampu membaca dan memahami blueprint, diagram, dan manual instruksi teknis
5. Memiliki keterampilan komunikasi yang baik dalam berintieraksi dengan rekan kerja, supervisor, dan klien

Electrical System Design & Development

Design and develop electrical systems and controls for various pump types (centrifugal, submersible, positive displacement).

Cross-Functional Collaboration

Collaborate with mechanical engineers, technicians, and project managers to integrate electrical components into pump systems.

Testing & Commissioning

Conduct testing/commissioning of electrical systems, including functional tests and troubleshooting.

Technical Support & Client Guidance

Provide support during installation, operation, and maintenance of pump systems.

Internal Coordination

Coordinate with Operations, Production, and Quality to resolve project issues.

Procurement & Specification Management

Liaise with Purchasing and Production for product specifications.

Sales Support & Technical Clarification

Support the sales team with technical clarifications.

Documentation & Change Management

Prepare BOMs and implement Engineering Change Notifications (ECN).